TSP KTM85SX and Husky TC85 2018-on (12 Degree) Top End Rebuild Kit – TSP P.RKT.KT85.18on.12DEG

Gyártó:
Cikkszám:
1012242
Gyári cikkszám:
P.RKT.KT85.18on.12DEG

63938.15

50345.0000

63 938 Ft

Nettó: 50 345 Ft

TSP KTM85SX and Husky TC85 2018-on (12 Degree) Top End Rebuild Kit – TSP P.RKT.KT85.18on.12DEG

  • A dugattyú (2 db Készleten)
  • B dugattyú (1 db Készleten)
Készleten
Rendelhető

*** THIS IS FOR A 12 DEGREE PISTON KIT – THIS WILL NOT SUIT A STANDARD HEAD. MUST BE USED WITH A HEAD DESIGN SPECIFICALLY TO SUIT 12 DEGREE PISTON SETUPS ***

Please note: KTM 85 2025 models run 0.01mm size larger stock than previous years. Piston size ‘B’ will be the same size an OEM ‘A/Group 1’ for a 2025 model.

This TSP top end rebuild kit will suit KTM85SX and Husky TC85 models from 2018 onwards with a 12 degree head design. It will also suit the Gas Gas MC85 2021-on models. You will receive the correct parts for your make/model.

It includes:

  • Piston kit in the size of your choice (A or B) in 12 degree. Piston kit includes rings, pin, circlips and a high quality cast piston with anti-friction coating. These pistons are made by Meteor in Italy and are THE BEST available.
  • Top end gasket kit. Packed especially for TSP. Includes a selection of base gaskets, powervalve cover gaskets and O rings… all O rings are the correct size and made from the correct material, unlike the cheaper aftermarket kits. (comes with a 0.25,0.30,0.50,0.60 and 0.80mm thicknesses)
  • Little end bearing. Made in Japan.

TSP Select rebuild kits are put together by TSP using parts sourced direct from OEM manufacturers in Japan and Europe. The parts we select are THE BEST available for each make/model and many are the exact same parts as the genuine items. All TSP Select rebuild kits are kept in stock at TSP.

Piston sizing: ideally you should measure your bore with a dial gauge to work out the correct piston sizing. If you cannot do this then a rough rule of thumb is use an A size under 60 hours of engine run time and use a B size over 60 hours of engine run time. Its ALWAYS better to have a bit too much clearance than not enough, so if in doubt use an A size.

 

Cikkszám: 1012242
Gyári cikkszám: P.RKT.KT85.18on.12DEG
#Típus A dugattyú
#Típus B dugattyú
Állapot Új
Raktárkészlet Rendelhető

Írjon véleményt

A megtekintéshez belépés vagy regisztráció szükséges