TSP Injector Relocation Kit – Suits 2020-2023 150TPI/250TPI/300TPI Models
391358.12
308156.0000
This kit will suit 150TPI, 250TPI and 300TPI 2020-2023 models. A very important key note: It is highly recommended to upgrade to our ECU reflash to ensure your bike gets the best intended results. If you run this kit with the standard OEM tune, the risk is on the owner to ensure their bike is operating safely. A very important key note (150TPI models): You cannot safely run this kit without updating to our new tune as the stock injector phasing on a 150 is actually different to the 250/300 models. You must update to our tune to run the IRK on a 150. Our unique TPI Injector Relocation Kit combines the best of TPI with the best of TBI in one package. Our kit moves one injector to the intake and leaves one injector in the stock TPI location. We also offer custom ECU mapping which allows us to deliver the best of both worlds… the smoothness on/off the throttle of the TPI combined with the power and reliability of the TBI setup. This kit allows you to run premix, or you can continue to run the stock oil pump. The kit comes with all the necessary hardware for a simple installation… including fuel hose, hose clamps, an injector blank (installed in the right side of the cylinder) and a 3D aluminium printed injector mount. You will need to disassemble the stock fuel line and utilise some of the existing components, however there is no modification required so it can always be put back to stock if necessary. It is very strongly recommend to install this kit with a TSP TPI re-flash to take full advantage of the relocation benefits. With your ECU, we have control over the injector phasing which will drastically improve the smoothness & reliability of your TPI bike. The fuel pooling in the video example cannot be changed unless we change the ECU mapping. We also have access to fuel, ignition and oil maps to make the bike much more responsive, smooth and predictable, while offering more power over stock. Customers who have previously purchased a TPI power kit that want to purchase this injector relocation kit, we will be offering the ECU re-flash update at an significant discount to these returning customers. A re-tune is normally priced at $385inc GST, but this will be offered for $150inc GST for customers who already have our TSP tune on their ECU. To run premix you will need an ‘oil pump delete kit’ which includes a loom & other block-off bungs in case you want to remove your oil tank. If you require this please tick the above box to add it to your order. Please see a full video below on the benefits and why we have changed to this new design. It will have some technical detail including engine videos explaining what we can achieve and why we are doing it.
| Cikkszám: | 979075 |
| Gyári cikkszám: | VAR.IRK.KT250300.TPI |
| #Elsődleges felhasználás | Trial |
| #Elsődleges felhasználás | Motocross |
| #Elsődleges felhasználás | Hard Enduro |
| #Oil Pump Delete Option | Yes, Premix for the bike! |
| #Oil Pump Delete Option | No - Stock Pump is good for me! |
| #Típus | Magas kompresszió |
| #Típus | Alacsony kompresszió |
| #Típus | Nagyon magas kompresszió |
| #Típus | Közepes kompresszió |
| Állapot | Új |
| Raktárkészlet | Rendelhető |
